There are many different types of floor surfaces and each one has its own unique needs and advantages. Some floors work better with certain chemicals than others. Some surfaces can handle more of a beating than others. When it comes to cleaning a surface, a riding floor scrubber can significantly cut down on the amount of time required to clean the floor. While there are numerous options available, even a used riding floor scrubber can save valuable time when it comes to cleaning. When it comes time to use that floor scrubber, there are several pieces of advice that everyone should keep in mind.
The first step is to prep the work area. While a floor scrubber might not move that quickly, it is still a large piece of equipment that packs a significant amount of power. For this reason, it is important to warn everyone in the area that a floor scrubber is in use. Therefore, place a cation sign up to warn others that a heavy piece of machinery is in use. In addition, move any furniture in the area out of the way of the floor scrubber. This will prevent any collateral damage and minimize safety hazards that could develop.
Before starting the floor scrubber, take the time to dust the area. Use a mop to move any debris out of the way. While the floor scrubber may look large, this debris can actually ruin a machine. This is because the debris could get sucked up in the pad and render the entire machine inoperable. Furthermore, trash can get lodged under the pad and be dragged along for the ride. This could leave water streaks over the cleaning surface. Therefore, take the time to mop up any debris that might be in the way. The floor scrubber will thank you.
When the cleaning process starts, begin at the outer radius. This means starting the machine near the edge of the wall or the outer boundary of the area that needs to be cleaned. With each pass around the area, use a sweeping turn with a large radius. Using this cleaning method will allow the squeegee or pad to mop up the entirety of any solution that was laid out. Use this strategy to prevent any dirt or grime from being left behind.
For floors that are particularly dirty, do not be afraid to take a second pass. Floors that are particularly sticky or filled with grime could still have some residue after the floor scrubber has passed through the first time. Usually, a second pass is all that is required to take care of this extra filth. Simply use the same process on the second pass. Start from the outer edges and work towards the inside. This will ensure that the room is clean without leaving dirty spots in the floor scrubber’s wake.